Life's finest experiences, world's finest properties
Experience the world’s finest locations, activities, and beauty.
Main Living Room
Television - Sharp Aquos with Apple TV
Overview
This TV operates through Apple TV directly connected to HDMI Input 3. Audio is available directly from the TV or through Main Living Room Stereo.
Key controls:
-
Turning TV On/Off - Use Sharp Aquos Remote.
-
TV Volume - Use Sharp Aquos Remote.
-
Changing Channel/Apps - Use Apple TV Remote to change Apps and Channels.
-
TV Volume Through Stereo - Use Onkyo Stereo Remote or Apple TV Remote.
Sharp Aquos Remote
Use Power button to turn TV on and off.
Use Input button to select HDMI 3 for Apple TV or HDMI 4 to other input source from Stereo.
If you are not using the Onkyo Stereo for audio, adjust TV volume with this remote.
Apple TV Remote
This remote has a built in rechargeable battery. If remote is not working, plug it into any standard Apple Lightening cable to charge.
Press Menu to turn Apple TV and Sharp TV on and to see content Menu.
Use Touch Pad at top of remote to navigate menus, press down on Touch Pad to select an item.
Press Microphone button to search.
+ / - buttons control Onkyo Stereo volume.
Onkyo Stereo Remote
Press yellow power button to turn on and off.
Press TV button to turn on TV as audio source.
Use Volume +/- buttons to control TV Volume.
Music - Onkyo TX-NR686 F4572E
Overview
This stereo receiver can play music from multiple sources to 2 separate Zones, Zone 1 in Main Living Room and Zone 2 on Main Deck. Zone 1 is the default zone for the stereo. To control the source and volume of Zone 2, you have to press the Zone 2 button on the front of the stereo first.
Ways to play music:
-
From Apple TV Apps
-
Airplay to Apple TV
-
From Bluetooth devices to stereo
From Apple TV Apps
Select “TV” source on stereo or stereo remote.
Select Apple TV App for music, sign-in to your account, play music.
Airplay to Apple TV
Select “TV” source on stereo or stereo remote.
Open Music App on Apple device, play music.
Airplay to “Main Living Room Apple TV”.
From Bluetooth Devices
Select “Bluetooth” source on stereo or stereo remote.
Connect to “Onkyo TX-NR686 F4572E” in Bluetooth devises in Setting on your device.
Open Music App on device and play music.
Main Living Room Fireplace
Overview
This fireplace is gas log only. Never put wood, paper, or anything else in this fireplace.
Steps light this fireplace:
-
Open the Fireplace Flue
-
Turn the Gas Supply Valve to On
-
Start the Pilot, then the Fire
Fireplace Flue
The fireplace flue must be open whenever the fire is lit. If it is not, dangerous carbon monoxide levels will build up in the room. To conserve energy the fireplace flue should be closed when fire is not in use.
Push the flue lever bar inside the front part of the fireplace up to open the flue.
Pull the flue lever bar down to close the flue.
Gas Supply Valve
The gas supply value for this fireplace is located on the wall to the right of the fireplace.
Turning this value on will not allow gas to flow to the fireplace unless the Pilot is lit.
To light the fire, turn the gas supply valve key completely counterclockwise to turn the gas on. Then follow instructions for Pilot and Lighting Fire.
Once you have finished using the fireplace for your visit, turn the gas supply valve key completely clockwise to turn the gas off.
Pilot and Fire Lighting
The Pilot light in this fireplace must be lit for at least 20 seconds before gas will flow to the fire.
To light the Pilot and fire:
-
Push and hold the black knob marked Pilot in towards the back of the fireplace.
-
With a long lighter, light the Pilot which is under the right side of the fake logs in the fireplace.
-
Once Pilot has burned for 20+ seconds, release the Pilot knob and turn it counterclockwise to the “On” position.
-
Adjust the fire to desired level using the black knob.
To turn the fire off, turn black knob to “Off” position. Pilot light will stay on until Gas Supply Valve is turned off.